Der magnetoresistive Effekt ist zudem besonders interessant für den Bereich Strommessung. Die äußerst hohe Empfindlichkeit stellt sicher, dass. 1 Der MagnetoResistive (MR) Effekt. Werden Nickel-Eisen Schichten, die eine voreingestellte Magnetisierungsrichtung aufweisen, in Streifenelemente. 2 Der Messbereich des Stromsensors wird über die Geometrie einer externen Stromschiene eingestellt und ermöglicht so ein breites Anwendungsfeld. 3 Der CFS ist ein programmierbarer Stromsensor im SMD. Gehäuse mit externer Stromschienenführung, dessen Strombereich sich durch die Geometrie der. 4 Vereinfacht gesagt funktioniert ein magnetoresistiver Sensor also auf die folgende Art: Ein Objekt mit einem eigenen Magnetfeld nähert sich dem Sensor. Der elektrische Widerstand ändert sich in der Folge. Dadurch lässt sich erkennen, in welchem Winkel das äußere Magnetfeld (und damit das Objekt) zum Sensor steht. 5 A common application for a magnetoresistive high field sensor is a contactless angular sensor, like the KMT32B, the KMT36H or the MLS-position sensors. In low field applications the magnetization vector is mainly determined by the form of the strips, because the magnetization shows a natural preference for the longitudinal direction. 6 A magnetoresistive sensor uses the fact that the electrical resistance in a ferromagnetic thin film alloy is changed through an external magnetic field. “Ferrum” is Latin and stands for “iron”. Generally, mixed alloys are used, for example iron and nickel. These sensors are exceptionally small, and due to their special material, they. 7 Magnetoresistive sensors can basically be divided into two groups. In high fi eld applications, such as where the fi eld strength of the applied fi eld is strong enough to saturate the soft magnetic sensor material (roughly for H>10 kA/m), the magnetization vector in the sensor is always (almost) parallel to the applied fi eld. 8 Magnetoresistive Sensors Application Note Figures 4 and 5. Sensitivity positioning N S MR Bridge Figure 4 Figure 5 N S Hon Second, the air gap between the sensor and magnetization must be minimized. The magnetoresistive bridge is located near the top center of the 2SS52M/SSMT package for increased sensitivity. By minimizing the air gap the gauss. 9 Der CFS ist ein programmierbarer Stromsensor im SMD Gehäuse mit externer Stromschienenführung, dessen Strombereich sich durch die Geometrie der Stromschiene einstellen lässt. Der-selbe Sensor kann somit für die unterschiedlichsten Anwendungen verwendet werden. Der CMS im THT-Gehäuse und bipolarer 15V-Spannungsver-. 10 Lernen Sie die Grundlagen des magnetoresistiven Effekts kennen und erfahren Sie, wie dieser bei der kontaktlosen Positionsmessung eingesetzt wird. 11